Anchor NP3

144.15 $

To secure a beam perpendicular to the foundation for tight spaces.

Galvanized steel support to withstand weather conditions.
Load capacity up to 3,000 lbs.
Solid attachment to the foundation without clearance.
Ideal for foundations with insulated formwork.
25-year warranty.

Hardware included: 2 anchor screws 1/2″ x 4 1/2″

Description

Professional-grade structural support allowing the installation of a beam perpendicular to the foundation. The NamiFix NP3 bracket has a capacity of 3000 lbs with a limited 25-year warranty. The NP3 model is specifically designed to allow for the installation of low-level decks, with anchors on each side of the beam seat.

It provides an ideal solution for insulated formwork, eliminating the need to cut the full length to attach the deck.

With its design, the NP3 model reduces the risk of breakage by allowing the insertion of the beam end only through the cladding, thereby limiting the risk of water infiltration. The NamiFix concept becomes very cost-effective due to its simplicity and quick installation. It installs directly onto the foundation. The piece is galvanized to withstand weather conditions.
–
The necessary anchors to secure the bracket to concrete are included in the box.
Only the use of these anchors allows for the certified 3000 lb capacity of the bracket.
To drill, use a 1/2″ drill bit.
Drill 1/2″ deeper than the length of the anchor provided in the box.